|
Post by Deleted on Jan 28, 2012 10:23:40 GMT -5
|
|
|
Post by Deleted on Jan 28, 2012 11:53:47 GMT -5
I just bought one and it fit into a small pickup bed. It does come apart shelves are approx. 36" x 24" thats for bottom, middle, top , and two back sections. Sides are 23"x24" - so your width needs to be at least 24 plus inches and your depth 36 inches . Does the back seat fold down? Good Luck
|
|
|
Post by Deleted on Jan 28, 2012 11:57:06 GMT -5
Mine came with the book on how it goes together - with two people it is easier.
|
|
|
Post by Deleted on Jan 28, 2012 11:58:08 GMT -5
It folds down but its only like 1/3 or 2/3 i guess depending on how you look at it. 1/3 is how far it comes down so 2/3 is whats is left. Im super nervous because its like two hours away. $150 including gas is still a good deal i think. Thanks for the help!!
|
|
|
Post by Deleted on Jan 28, 2012 12:24:17 GMT -5
Lucky!! Definitely a good deal
|
|
|
Post by Deleted on Jan 28, 2012 12:55:05 GMT -5
I hope so. Doesnt look like this person got ramp covers for it. Might not even use it until i get some
|
|
|
Post by Deleted on Jan 28, 2012 13:35:40 GMT -5
be sure all screws & pieces are put into a slide lock bag- loose one and you cannot put it back together
phillips screwdriver!!!!& hammer in case
|
|
|
Post by Deleted on Jan 28, 2012 13:54:55 GMT -5
K thanks
|
|
|
Post by Deleted on Jan 28, 2012 22:55:40 GMT -5
Mine was missing two screws (or I lost them at the car wash cleaning the cage ) I emailed them asking to buy some and they sent me 6 free screws. I paid $120 and no half shelves - so I just used boxes and tubes to connect to the second level. I did get 4 ladders that I am not using.
|
|
|
Post by Deleted on Jan 29, 2012 13:30:40 GMT -5
Can i stack a 141 on top of a 142? If there is thread already i missed it.
|
|
|
Post by Deleted on Jan 29, 2012 13:34:25 GMT -5
Very good price! It should fit into your Mazda. Just take out that cover thingy (don't know whats the proper name...), it goes over your trunk. My husband has the same car.
|
|
|
Post by Deleted on Jan 29, 2012 13:37:33 GMT -5
Yeah i got the 142 home and then last night i came across a 141 for $40. Thinking what the heck i could use it for sick fuzz or whatever. Maybe even stack it on top the 142. I would think i have to cut a section out of the bottom pan, get a set of stairs. Not sure what else
|
|
|
Post by Deleted on Jan 29, 2012 13:37:45 GMT -5
Can i stack a 141 on top of a 142? I don't think so. A 141 is a single level. In order to stack anything on top of a 141, you need a 143 add-onmodel. The 142 is basically a 141 + 143 stacked & sold together. I could be wrong though.
|
|
|
Post by sherik on Jan 29, 2012 15:16:48 GMT -5
No you can't. It won't have the metal level with the hole cut out to join them. Plus the metal sleeves that go inside won't be there. But if you can buy them from midwest then you could.
|
|
|
Post by Deleted on Jan 29, 2012 15:27:42 GMT -5
I'd just keep the cage as a sick cage. You could put it in another room for quarantine of new ferrets, keeping sickies away from healthies.
|
|