|
Post by macgirl on Feb 12, 2019 17:17:37 GMT -5
I have a 2 storey ferret nation setup, newer version, without the bottom ‘’wheeled’ section. I want to expand it by 1 level, and add the wheeled section. Are they compatible to stack together? I can get a single storey FN FOR $235 CDN including taxes, but I have a couple different sellers with a 2 storey critter nation with wheels for $300, so was thinking maybe buy the CN version, expand my setup, and sell the unneeded storey to regain some of my cost? As always, any help is greatly appreciated!
|
|
|
Post by peacexlovexpets on Feb 12, 2019 18:50:04 GMT -5
Does your ferret nation go together via screws? The critter nations I have (one double and one single, both with wheeled bottoms), have sets of prongs (2/corner of the cage) That stick straight down and slide into place, no screws involved. If the ferret nation has the same bottom, I would assume that it would slide together just fine.
Mine did come a little banged up when I first got them (brand new) and I had to straighten out the prongs with a hammer, so keep that in mind.
|
|
|
Post by macgirl on Feb 12, 2019 20:02:21 GMT -5
No screws, all prongs and ‘sockets’. The 2 CN. I’m looking atalso look like prong and socket?
|
|
|
Post by abbeytheferret6 on Feb 15, 2019 10:24:10 GMT -5
Yes according to a representative at 800-428-8560. Only difference is their color and bar spacing----but you can verify as well.
|
|
|
Post by macgirl on Feb 16, 2019 7:56:43 GMT -5
Thank you very much!
|
|